VIA EPIA ek integrated graphics - Printable Version +- MME4CRT Forum (https://mme4crt.alphanudesign.co.uk/forum) +-- Forum: MME4CRT (https://mme4crt.alphanudesign.co.uk/forum/forumdisplay.php?fid=1) +--- Forum: Requests (https://mme4crt.alphanudesign.co.uk/forum/forumdisplay.php?fid=11) +--- Thread: VIA EPIA ek integrated graphics (/showthread.php?tid=41) |
VIA EPIA ek integrated graphics - paul - 03-04-2019 Hi, I have an old via epia mini-itx motherboard, model EK10000g with integrated video, a VIA C-PRO datasheet Any chance on using it for 15khz MME4CRT without adding a pci graphic card? RE: VIA EPIA ek integrated graphics - alphanu - 03-06-2019 This seem like quite a slow PC. However, it will run the less cpu intensive cores I would have thought. GPU wise unfortunately, I do not know. Your best bet would be try try with Linux and use 1920 super resolution. if that works try dynamic. Native most likely will not work. RE: VIA EPIA ek integrated graphics - paul - 03-07-2019 Thanks for the reply, maybe I'll give it a shot! RE: VIA EPIA ek integrated graphics - retrorepair - 03-21-2019 Please let us know if you do, it'd be good to know if native/dynamic/super res etc works as we will be starting a compatability list soon. RE: VIA EPIA ek integrated graphics - paul - 04-05-2019 (03-21-2019, 12:30 AM)retrorepair Wrote: Please let us know if you do, it'd be good to know if native/dynamic/super res etc works as we will be starting a compatability list sooSorry for the late reply, I found a leak in two capacitors on the motherboard, so, at least for the moment, I have put aside the possibility of using it for this project. Bye! |