240p and 31khz - Printable Version +- MME4CRT Forum (https://mme4crt.alphanudesign.co.uk/forum) +-- Forum: MME4CRT (https://mme4crt.alphanudesign.co.uk/forum/forumdisplay.php?fid=1) +--- Forum: General discussion (https://mme4crt.alphanudesign.co.uk/forum/forumdisplay.php?fid=12) +--- Thread: 240p and 31khz (/showthread.php?tid=20) |
240p and 31khz - floppynojutsu - 02-17-2019 Hello Alphanu, A while ago, you spoke about 240p with 31khz CRT https://www.youtube.com/watch?v=C_pYmNG89RQ Can we achieve this mode with Windows + Retroarch + MME4CRT ? I've a Trinitron Multiscan 20sfII CRT for testing. Specials settings needed ? CRTemudriver is needed ? Thanks a lot ! RE: 240p and 31khz - alphanu - 02-17-2019 Yes, its pretty easy to get done. You will need to install all the resolutions @120hz for ~60hz cores and 110hz for ~54 hz cores (MK, ViperX). This then gives a out a 31khz version of the resolution. ONLY 55hz - 60hz resolutions work this way. You will need to enable 1.0x max run speed in throttling options. to reduce the game speed to 55 - 60 hz. This can cause some ghosting depending on the game you are ruining though. RE: 240p and 31khz - floppynojutsu - 02-17-2019 Ok ! If I understand I must use "MME4CRT Dynamic Calc" and insert result in NVIDIA / Panel / Custom Resolution ? Or CRU (by ToastyX) ? I've tried with NVIDIA Panel but each time I insert custom resolution (for exemple Saturn, 352x288 with 120hz) test failed and I can't valid this resolution) RE: 240p and 31khz - floppynojutsu - 02-17-2019 Great ! I can add custom resolution with CRU. Alphanu, CRU is limited to 4 slot for custom/detailed resolutions. Do you have trick to add more ? RE: 240p and 31khz - alphanu - 02-17-2019 Yes, I cant remember were it is exactly. However, in one of the bottom panes the is extended resolutions. i believe it allows for up to an extra 16 resolution. |